Oracle-audio-technologies Sun Oracle SunDual 10GbE XFP Manuale Utente Scaricare il pdf (Pagina 69)

Chapter 7 Configuring Link Aggregation 59

2. Plumb up the interface aggrkey, which is aggr33 is this case:

3. Show link-aggregation status again, and now the state should become attached:

4. Use the dladm show-aggr -s command to display statistics:

5. Use the dladm show-aggr -L command to display LACP specific

information:

For more information refer to the man pages for dladm, man dladm.

# ifconfig aggr33 plumb

# ifconfig aggr33

aggr33: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 8

inet 0.0.0.0 netmask 0

ether 0:3:ba:d8:9d:e8

# ifconfig aggr33 192.168.1.1/24 broadcast + up

# ifconfig aggr33

aggr33: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 8

inet 192.168.1.1 netmask ffffff00 broadcast 192.168.1.255

ether 0:3:ba:d8:9d:e8

# dladm show-aggr

key: 33 (0x0021) policy: L4 address: 0:3:ba:d8:9d:e8 (auto)

device address speed duplex link state

nxge0 0:3:ba:d8:9d:e8 10000 Mbps full up attached

nxge1 0:3:ba:d8:9d:e9 10000 Mbps full up attached

# dladm show-aggr -s

key: 33 ipackets rbytes opackets obytes %ipkts %opkts

Total 0 0 16 1182

nxge0 0 0 16 1182 - 100.0

nxge1 0 0 0 0 - 0.0

# dladm show-aggr -L

key: 33 (0x0021) policy: L4 address: 0:3:ba:d8:9d:e8 (auto)

LACP mode: off LACP timer: short

device activity timeout aggregatable sync coll dist defaulted expired

nxge0 passive short yes no no no no no

nxge1 passive short yes no no no no no

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 85 86

Nessun commento

Oracle-audio-technologies Sun Oracle SunDual 10GbE XFP Manuale Utente Pagina 69